登录| 注册    
收藏  点赞 

哈希Orbisphere G1100微量溶解氧分析仪

主编:

出版社:中国农业出版社

ISBN:NY0698

出版时间:

关键词:哈希 Orbisphere G1100 微量 溶解氧

阅读

    仪器分类:011102 COD分析仪生产厂家:美国哈希(Hach)公司国别:美国仪器型号:Orbisphere G1100功能和用途:ORBISPHERE G1100传感器的工作原理是荧光法。

    蓝光激发荧光物质,红色的荧光被检测。

    氧气的存在会改变红色的荧光的衰减时间。

    使用合适的校准曲线,衰减时间可以被换算成氧气的分压值。

    ORBISPHERE G1100测量系统由用户界面、流通池、传感器和校准样品组成。

    安装简单快速,无需特别准备工作。

    即插即用型的传感器可以立刻开始测量。

    主要技术指标:量程为0-600μg kg-1每1-2年更换一次活性荧光帽■准确、可靠、无需依赖操作人员-干的传感器,无膜、无电解液、无化学品-可以编程的在线校准,能够满足操作的要求■ 将操作人员花费在仪器上的时间减到最少-全自动的在线校准-每一到两年的维护所需时间仅为5分钟。

  • Operator Manual ORBISPHERE G1100 SENSOR AND 410 INSTRUMENT

    Revision E-14/09/2007Product Recycling InformationENGLISHElectrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12 August 2005. In conf...

  • 1 Installation

    WARNINGThis section provides necessary information to install and connect the instrument. The installation of the instrument should be performed exclusively by personnel specialized and auth...

  • 2 User Interface

  • 3 View Menu

    Fig 3-1: View Menu

  • 4 Measurement Menu

    Fig 4-1: Measurement Menu

  • 5 Calibration Menu

    Fig 5-1: Calibration MenuCalibrations can only be performed once the instrument has been installed, configured, and the channel has been set up. You must also ensure that you have the correc...

  • 6 Inputs/Outputs Menu

    Fig 6-1: Inputs/Outputs Menu

  • 7 Communication Menu

    Fig 7-1: Communication MenuThe external RS-485 port of the main board is directly connected to a RS-485 bus (single twisted pair). Optionally it can be connected to a fieldbus module (gatewa...

  • 8 Security Menu

    Fig 8-1: Security MenuNote:When the instrument is started for the very first time, security is disabled by default. It is highly recommended that each user be entered into the system and giv...

  • 9 Products Menu

    Fig 9-1: Products Menu

  • 10 Global Configuration Menu

    Fig 10-1: Global Configuration Menu

  • 11 Services Menu

    Fig 11-1: Services Menu-Part 1Fig 11-2: Services Menu-Part 2

  • 12 Maintenance and Troubleshooting

  • 13 Specifications

  • 14 Part Lists

  • Appendix A: Glossary

  • Annex

    Tables and IllustrationsFig. 1-1 Wall/Pipe Mount Instrument Dimensions (in millimeters) ..................10Fig. 1-2 Wall Mount Bracket .........................................................